Tobi Mask - Do it yourself the kick ass way! ^_^

Hi just want to share with you my latest project. My own Tobi mask from the Naruto Shippuden series. This is how the guy looks like. ^_^

Destroy the world!

Materials


White mask (Jabbawockeez mask) or any plain mask
Black Marker
Bond paper
Adhesive tape (Scotch and Double)
Tissue
Glue
Paint Brush
Acrylic paints (Red and Yellow)
Sandpaper
Black cloth (stretchable recommended)
Glue Gun with glue sticks

Procedure

1. Draw lines using a marker on the mask, use the reference tobi mask photo. Adjust if necessary to achieve the spiral effect you want. The pattern would serve as your guide.

2. Add double adhesive tapes in between the line. Make sure you cover most of the spaces in between the lines.

3. Roll some bond paper and and stick it onto the face mask following the lines. It should look this. ^_^. This would serve as the spiral contours of the mask

4. Cover the rest of the mask with rolled bond papers following the rest of the pattern. Use scotch tape when binding loose ends of the rolled paper.

5. Using a paintbrush apply glue (diluted with water) on the surface of the mask. Add tissue paper on the mask. Ensure the mask is wet enough with glue so that the tissue binds to it properly. Repeat the process until the whole mask is perfectly cover with tissue.

This is the part where adjustments can be done on the final contour of the mask.

6. Let it dry. After drying use sand paper to smoothed out the surface of the mask. During this process you may see some defects such as pit holes and crevices. Cover those with glue and tissue, then dry and sand it again.

7. Paint the mask with a white paint base then top it with the desired orange tone. I combined red and yellow paints and adjusted it accordingly to achieve the desired color.

8. Paint the spiral grooves with a darker orange color (one shade darker). This would enhance the spiral look on the mask.

9. Using a glue gun stick the pre-cut black cloth at the back side of the mask. This would function as the holder and the detail of the mask. Ensure that the black cloth has allowance when the mask is worn on the face.

10. Add some line details using a black marker. This is to emphasize the grooves and spiral patterns of the mask.

I will be using this on our Company Christmas party with a cosplay theme. BTW this is my first cosplay attempt. I rented the Akatsuki vest to complete the outfit! This is how the complete costume looks with the do-it-yourself Tobi mask!

Thats not the pants I'll be wearing on the party! :P

Were buddies!

Had enjoyed the whole creation process. I am very much pleased on the outcome!

Ah! Super Saiyan 3 Son Gokou!

Thanks for dropping by!

Read More

HG 1/100 Nataku Assault Custom

Introductions

This is the first of all first. I have been building a lot of gundams from high grades to master grades. But most of them are all snap builts no modifications done, have done some painting but I stick with the kits designed color scheme. Since one of my gunpla goals this year is to join the GBWC 2011 I have decided to do some modifications not just on the kit but also on the color scheme.

Planning

I need a kit off course ^_^ haha! I am a fan of the Gundam wing endless waltz series but most of the modelers use Wing, Heavy Arms and Deathscythe as their base kit and I wanted my entry to be uncommon which leaves Sandrock and Nataku. I'v chosen Nataku for the project because I have not seen a lot (actually none - poor research capabilities I guess haha!) that was modified.

Nataku is basically a melee type MS, Dragon Fangs and twin trident as the main weapon, it does not specialize with projectile weapons as compared to Wing and H-Arms. For this project I want it to to be converted from a melee type to a projectile type MS

Some before pictures (snap built)

Materials and Procedures

I wanted the kit to shoot missiles and have guns but I want to retain the dragon fangs since it is the signature weapon of Nataku. The solution convert the dragon fangs to a gun! :P

made some window holes (left)

add gatling guns from serpent custom and painted it.

Did i mention that it also function as a melee weapon? :P Presenting the trident conversion.

Basically the trident beam holder was removed and mounted on the back side of the fangs.

and viola! Dragon trident fangs! ^_^

to be continued...

Thanks for dropping by.

Read More